Tube Puller CP-1000-CC

KRAIS Tube Expanders

Key Features

This unit has been designed to remove both ferrous and non-ferrous tubing from condensers, chillers and heat exchangers. Capacity from 5/8” to 1-1/2” O.D. gauge 16 to 24 (16 to 38 mm O.D. wall 0,5 to 1,6 mm) for tube sheets up to 2” (50 mm).

Specifications

Pulling force 15 T (150 kN)
Pulling Stroke 6 “ (160 mm)
Pulling speed 0,7”/sec (17 mm/sec)
Dimension 3,38”x 26,77”(86 x 680 mm)
Weight 26,4 Lbs (12 kg)

Parameters

Tube OD: 5/8 inch (15,8 mm)

TUBE GAUGE GRIPPER SET MIN ENTER DIM AFTER EXP. MAX ENTER DIM AFTER EXP. DRAW MANDREL NOSE PIECE LOCK NUT ADJUST NUT JAW O’RING C O’RING
16-17 CP-1000-01-58-16 12,85 mm (0,506”) 13,85 mm (0,545”) CP-10S-03-58 CP-10S-06A-58 CP-10-LN-58 CP-10-AN-58 CP-2220 CP-1724
18-19 CP-1000-01-58-18 13,60 mm (0,535”) 14,60 mm (0,574”) CP-10S-03-58 CP-10S-06A-58 CP-10-LN-58 CP-10-AN-58 CP-2220 CP-1724
20-21 CP-1000-01-58-20 14,30 mm (0,562”) 15,30 mm (0,602”) CP-10S-03-58 CP-10S-06A-58 CP-10-LN-58 CP-10-AN-58 CP-2220 CP-1724
22-23 CP-1000-01-58-22 14,60 mm (0,576”) 15,65 mm (0,616”) CP-10S-03-58 CP-10S-06A-58 CP-10-LN-58 CP-10-AN-58 CP-2220 CP-1724

Tube OD: 3/4 inch (19 mm)

TUBE GAUGE GRIPPER SET MIN ENTER DIM AFTER EXP. MAX ENTER DIM AFTER EXP. DRAW MANDREL NOSE PIECE LOCK NUT ADJUST NUT JAW O’RING C O’RING
16-17 CP-1000-01-34-16 16,05 mm (0,631”) 17,05 mm (0,671”) CP-10S-03-34 CP-10S-06A-34 CP-10-LN-34 CP-10-AN-34 CP-2220 CP-1724
18-19 CP-1000-01-34-18 16,90 mm (0,665”) 17,90 mm (0,704”) CP-10S-03-34 CP-10S-06A-34 CP-10-LN-34 CP-10-AN-34 CP-2220 CP-1724
20-21 CP-1000-01-34-20 17,60 mm (0,692”) 18,60 mm (0,732”) CP-10S-03-34 CP-10S-06A-34 CP-10-LN-34 CP-10-AN-34 CP-2220 CP-1724
22-23 CP-1000-01-34-22 17,95 mm (0,706”) 18,95 mm (0,746”) CP-10S-03-34 CP-10S-06A-34 CP-10-LN-34 CP-10-AN-34 CP-2220 CP-1724

Tube OD: 7/8 inch (22,2 mm)

TUBE GAUGE GRIPPER SET MIN ENTER DIM AFTER EXP. MAX ENTER DIM AFTER EXP. DRAW MANDREL NOSE PIECE LOCK NUT ADJUST NUT JAW O’RING C O’RING
16-17 CP-1000-01-78-16 19,20 mm (0,755”) 20,20 mm (0,795”) CP-10S-03-78 CP-10S-06A-78 CP-10-LN-78 CP-10-AN-78 CP-2220 CP-1724
18-19 CP-1000-01-78-18 20,00 mm (0,787”) 21,00 mm (0,826”) CP-10S-03-78 CP-10S-06A-78 CP-10-LN-78 CP-10-AN-78 CP-2220 CP-1724
20-21 CP-1000-01-78-20 20,70 mm (0,815”) 21,70 mm (0,854”) CP-10S-03-78 CP-10S-06A-78 CP-10-LN-78 CP-10-AN-78 CP-2220 CP-1724
22-23 CP-1000-01-78-22 21,05 mm (0,828”) 22,05 mm (0,868”) CP-10S-03-78 CP-10S-06A-78 CP-10-LN-78 CP-10-AN-78 CP-2220 CP-1724

Tube OD: 1 inch (25,4 mm)

TUBE GAUGE GRIPPER SET MIN ENTER DIM AFTER EXP. MAX ENTER DIM AFTER EXP. DRAW MANDREL NOSE PIECE LOCK NUT ADJUST NUT JAW O’RING C O’RING
16-17 CP-1000-01-1-16 22,40 mm (0,881”) 23,40 mm (0,921”) CP-10S-03-1 CP-10S-06A-1 CP-10-LN-1 CP-10-AN-1 CP-2220 CP-1724
18-19 CP-1000-01-1-18 23,20 mm (0,913”) 24,20 mm (0,952”) CP-10S-03-1 CP-10S-06A-1 CP-10-LN-1 CP-10-AN-1 CP-2220 CP-1724
20-21 CP-1000-01-1-20 23,90 mm (0,941”) 24,90 mm (0,980”) CP-10S-03-1 CP-10S-06A-1 CP-10-LN-1 CP-10-AN-1 CP-2220 CP-1724
22-23 CP-1000-01-1-22 24,70 mm (0,972”) 25,70 mm (1,011”) CP-10S-03-1 CP-10S-06A-1 CP-10-LN-1 CP-10-AN-1 CP-2220 CP-1724

Non standard sizes on request