Tube SpinAir H

KRAIS Tube Expanders
KRAIS Tube Expanders

Key Features

Hydraulic tube spinner SpinAir H is designed to remove and flatten non ferrous tubes from 5/8” to 11⁄4” OD as standard. Can also be used to extract ferrous tubes from 5/8” to 11⁄2” OD using special shaped rolls sized to fit each tube. SpinAir H is supplied with heavy duty trans- port locker, hands tools for normal operation and user manual.

Pulling rolls are made from tool steel and hardened for extended life. High quality, strength construction body is made from aircraft grade aluminium and is anodised for high corrosion resistance. Nose piece and bearing caps are made from stainless steel for corrosion resistance. Fully sealed bearings guarantee thousands of hours trouble free operation!

Pump Requirements

  • „Min: 40 l/min at 2000 psi (gives approximately 30 m/min);
  • Max: 100 l/min at 2250 psi (gives approximately 70 m/min);
  • Forward and reverse oil flow.
    It is recommended that the pump should be controlled by pedant with a forward and reverse
    lever attached to the Tube Traveller head. Variable flow control preferred.

Specification

Pulling Speed (depends on pump):…………… up to 70 m per minute
Standard Configuration:…………………………… 1” non ferrous tubes
Body construction:……………………………………aircraft grade aluminium, tool steel stainless.
Weight:……………………………………………………. 50 kg
Size:………………………………………………………….160 x 220 x 350 mm